Product/Service
RF Power Amplifier - 50 Watts CW, 1 to 1000 MHz
•Datasheet: Model 50W1000B
The Model 50W1000B, RF Power Amplifier, is a portable, self-contained, air-cooled, broadband, solid state RF amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in the high power stages to lower distortion and improve stability.
The 50W1000B RF power amplifier, when used with an RF sweep generator, will provide a minimum of 50 watts of swept power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 50W1000B, RF Power Amplifier, is protected from RF input overdrive by limiting diodes and an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm.
The RF Amplifier stages are protected from over temperature by removing the DC voltage to them if an over temperature condition occurs due to cooling blockage or fan failure. There is a digital display on the front panel of the RF Amplifier to indicate the operate status and fault conditions when an over temperature, power supply, or amplifier fault has occurred. The RF Amplifier can be returned to operate when the condition has been cleared.
The 50W1000B RF power amplifier includes digital control for both local and remote control of the amplifier. This 8-bit RISC microprocessor controlled board provides both IEEE-488 (GPIB) and asynchronous, full duplex RS-232 control of all amplifier functions.
Click Here To Download:•Datasheet: Model 50W1000B
- Ask a question.
- Request more detailed information or literature.
- Discuss your current project/application.
- Request a quote.
- Locate a distributor in your area.
- Schedule a demo.
