Product/Service

150 Watt CW, 80 To 1000 MHz RF Power Amplifier

Source: AR

150W1000pic
The Model 150W1000 is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 150W1000, when used with a sweep generator, will provide a minimum of 150 watts of RF power...

Click Here To Download:
Datasheet: 150 Watt CW, 80 To 1000 MHz RF Power Amplifier

The Model 150W1000 is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 150W1000, when used with a sweep generator, will provide a minimum of 150 watts of RF power.

The Model 150W1000 is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a digital display, menu assigned softkeys, a single rotary knob, and four dedicated switches (POWER, STANDBY, OPERATE and FAULT/RESET) to offer extensive control and status reporting capability. The display provides operational presentation of Forward Power and Reflected Power plus control status and reports of internal amplifier status.

Special features include a gain control, internal/external automatic level control (ALC) with front panel control of the ALC threshold, pulse input capability and RF output level protection. Also included is an internal RF detector which provides an output for use in self-testing or operational modes. Protection is provided by DC current level sensing and individual fusing of all output stages.

All amplifier control functions and status indications are available remotely in GPIB / IEEE-488 and RS-232 format. The buss interface connector is located on the back panel and positive control of local or remote operation is assured by a keylock on the front panel of the amplifier.

Housed in a stylish, contemporary bench top enclosure, the Model 150W1000 provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, and as a driver for frequency multipliers and higher power amplifiers. A safety interlock can be implemented via a rear panel connector.

Click Here To Download:
Datasheet: 150 Watt CW, 80 To 1000 MHz RF Power Amplifier

Click here to request pricing information for this product.

For a list of all broadband amplifiers by frequency click on link below:
Broadband Amplifiers

Newsletter Signup
Get the latest industry news, insights, and analysis delivered to your inbox.
Join your peers