Test RF Radiated Immunity: MT06000 Multistar™ Radiated Immunity System

THE MTO6000 Multistar™ Radiated Immunity System allows a user to test multiple frequencies, or tones, at one time. The result is the ability to test RF radiated immunity faster than previously possible. The number of tones tested are limited only by the signal generator bandwidth and the size of the amplifier used with the system.

Click Here To Download:
•Test RF Radiated Immunity: MT06000 Multistar™ Radiated Immunity System

Setup is made simple through the system's single housing design. All instruments needed to perform radiated immunity testing for IEC 61000-4-3 specifications except the required amplifiers, antennas and directional couplers. Amplifiers can be sized and selected based on your required field levels and testing needs. The MT06000 Multistar™ Radiated Immunity System includes an RF switch matrix, automated radiated immunity test software, a vector signal generator, a vector signal analyzer, an RF pre-amplifier, and an RF field probe and monitor.

Information on the MT06000 Multistar™ Radiated Immunity System's internal test specifications, vector signal analyzer specifications, vector signal generator specifications, RF preamplifier specifications, and field monitor/probe specifications can be found on the available datasheet. You can also contact AR directly if you have any questions on the radiated immunity system.

Click Here To Download:
•Test RF Radiated Immunity: MT06000 Multistar™ Radiated Immunity System