3U PXI RF Signal Analyzer

Ztec Inc.T002PXI is an RF signal analyzer that combines the functions of a frequency counter, time-interval analyzer, and peak-power meter in a single-wide, 3U PXI/Compact PCI card. The analyzer processes a continuous or pulsed RF input signal with a frequency ranging from 100 MHz to 3 GHz. The RF input is processed in time-capture circuitry that measures the pulse width and pulse repetition interval (PRI), a high-speed counter that measures the RF frequency, and a calibrated envelope detector that measures the peak power.

The time interval analysis applies to pulse-modulated RF input signals. An on-board digital signal processor (DSP) performs the measurements of pulse-width, PRI, frequency, and peak power in less than 100 microseconds. On-board memory allows the acquisition and analysis of multiple subsequent RF pulses without any lost RF pulse data.

Specifications:
Microwave Input
Frequency: 100 MHz to 3.0 GHz
Signal Range: -34 dBm to +16 dBm
Input Coupling: AC
Signal Modulation: Continuous Wave or Pulse Modulation

RF Pulse Width Measurements (Pulse-Modulated Inputs Only)
Minimum Pulse Width: 100 nanoseconds
Accuracy: + 0.5 nanoseconds
Resolution: 1 nanosecond

RF Pulse Repetition Interval Measurements (Pulse-Modulated Inputs Only)
Minimum PRI (no lost pulses): 100 microseconds
Accuracy: +0.5 nanoseconds
Resolution: 1 nanosecond

<%=company%>, 6610 Gulton Court NE, Albuquerque, New Mexico 87109. Tel: 505-342-0132; FAX: 505-342-0222