Product/Service

IP201S J1850 VPW Interface

Source: C&H Technologies, Inc.
The IP201S is a single-wide industry pack (IP) that supports the Variable Pulse Width (VPW) messaging practices of SAE J1850 Standard for Class B multiplexed communications network interface
C&H Technologies, Inc.is a single-wide industry pack (IP) that supports the Variable Pulse Width (VPW) messaging practices of SAE J1850 Standard for Class B multiplexed communications network interface. C&H Technologies, Inc.provides the physical and data link layers for J1850 single wire VPW modulated communication. C&H Technologies, Inc.can be used with any conforming industry pack carrier module, such as VME/VXI, PXI, PC-AT, or PCI.

Applications

  • Automotive Electronics Testing
  • Automotive Electronics Simulation
  • Communications

    • Specifications
    Message Handling Capabilities:

  • 10.4 Kbs transmit/receive
  • 41.6 Kbs receive
  • 64 Kbytes of memory for transmit/receive buffer and message filter definition
  • Long message support (over 16 Kbytes)
  • Automatic framing of transmitted message with Start of Frame and CRC bytes
  • Global transmit/receive enable/disable

    • Message Transmission Types:

  • Immediate
  • Periodic
  • On-trigger
  • In-Frame Response (Type 1, 2, & 3 Supported)

    • Receive Message Processing:

  • Incoming Filtering up to 3 bytes
  • Hardware gating using strobe
  • Time Stamping (1 ms resolution)

    • Bus Status and Error Detection:

  • Break
  • Idle
  • CRC error
  • Non-CRC error

    • Automatic Collision Detection

    Extensive Interrupt Support

    Temperature:

  • Operating: 0oC to 50oC
  • Storage: -40oC to 70oC

    • Power:

  • +5V @ l00 ma
  • +12V @ 10 ma

    • <%=company%>, 445 Round Rock West Drive, Round Rock, TX 78681-5012. TEL: 512-733-2621. FAX: 512-733-2629.