LASAR Version 6.60 Simulation Software

Teradyne's LASAR V6.60 software is the defense industry standard for generating digital test programs and diagnostics for high-speed functional testers. It is currently used in more than 140 defense electronics and avionics programs worldwide and is routinely specified by the U.S. Department of Defense (DoD) as a contract requirement.

Using dynamic min/max timing analysis, advanced simulation, and fault simulation algorithms, LASAR produces accurate, reliable test results. Test programs run reliably, right from the start, passing good boards and failing bad boards. Because LASAR accurately predicts how a board will behave under test, test programs can be debugged thoroughly in software, eliminating debug time on the tester.

LASAR V6.60 Features:

Used by more than 3,000 TPS developers on more than 140 defense programs worldwide

Menu-guided programming streamlines TPS development and brings new users up to speed fast

VITAL (IEEE Std 1076.4) and structural Verilog simulation options allow reuse of ASIC and FPGA models generated in design

SmartModel interface pro-vides access to more than 11,000 simulation models from Synopsys

Synopsys Hardware Modeler interface provides access to 3,000 standard hardware mod-els from Synopsys

Dynamic min/max timing analysis and realistic fault simulation reduce tester inte-gration time

Accurate guided-probe and fault-dictionary diagnostics ensure efficient fault isolation and repair

Direct output to DoD-approved test equipment, commercial ATE, and Teradyne's L300 and Spectrum families of testers

LASAR V6.60 available on workstations from Compaq (Alpha OVMS 7.1, VMS 6.2), Hewlett-Packard (HP/UX 10.20), and Sun (Solaris 2.6).

VITAL and Verilog modeling support and SmartModel options available on Hewlett-Packard and Sun workstations.

Year-2000 ready

Teradyne Inc., Assembly Test Group, 2625 Shadelands Dr., Walnut Creek, CA 94598. Tel: 925-932-6900 or 1-800-227-1620; Fax: 925-934-0540.