Martel Electronics Announces DMC-1400 Documenting Multifunction Calibrator
Any multi-meter, data logger, transducer, or other electronic instrument can be set up and calibrated. After each calibration point, the "SAVE" key is pressed to store the calibration data. When the calibration is completed, the user follows the prompts to enter the "tag" information, and the documented calibration is complete. The DMC-1400 calibrator also features the ability to test for pass/fail criteria, capture both AS FOUND and AS LEFT data, maintain calibration data for 50 instruments in nonvolatile memory, and even print calibration certificates right in the field, with no PC needed, using the optional OTS-100 portable certificate printer.
The DMC-1400 multifunction calibrator measures and simulates thermocouples, RTDs, current, voltage, frequency, pressure and source pulse trains. A communications port, compatible with Martel-BETA BetaPort-P pressure modules and an isolated milliamp/Volt read-back circuit is provided. Arrow keys, direct numeric keypad entry, and three software-driven function buttons, plus a large backlit, menu-driven graphics display.
Additional features include a built-in 250-Ohm resistor for HART compatibility with smart transmitters and PLCs, full fuseless protection, and a serial communications port for full control with ASCII commands. The DMC-1400 calibrator is supplied with a rugged protective boot, four standard alkaline AA batteries, padded carrying case, test leads, communications cable, USB adapter, user manual, quick start guide, DVD and CD based video training and a NIST traceable calibration certificate. Optional accessories include the BPPA-100 adapter for BetaPort-P pressure modules and pressure modules. A rechargeable battery kit is available for recharging over standard alkaline batteries. Finally, the OTS-100 battery operated portable printer is available for printing calibration certificates in the field.
SOURCE: Martel Electronics Corporation