Product/Service

Minilyzer ML1 Professional Audio Analyzer

Source: Neutrik Instrumentation Inc., a subsidiary of Neutrik AG
The Minilyzer continuously measures audio levels at RMS or peak levels, absolute or relative to a definable reference with selectable units
The Minilyzer continuously measures audio levels at RMS or peak levels, absolute or relative to a definable reference with selectable units. The accurate frequency measurement, with a high resolution of 100ppm, gives additional functions and acts as the base for distortion measurement. The meter features DIN, BS and Nordic as standard. Distortion is measured as THD+N, automatically rejecting the fundamental frequency and calculating the THD+N value in dB or percent.

A set of audio weighting filters can be achieved in all measurement functions. A balance indicator continuously monitors and displays the quality of the signal balance giving immediate detection of defective or wrongly wired cable. The intuitive and self explanatory user interface is based on pull down menus providing quick and simple access to the different functions, modes and menus. The unit is powered by three standard AA-size batteries.

  • LEVEL as RMS or Peak values in absolute or relative units
  • Auto ranging, auto scaling, auto nulling
  • Frequency response sweeps with external signals
  • Selectable Highpass and weighting filters
  • 100 x 64 pixel graphical display with backlight illumination
  • Extremely low power consumption utilizing APM technology

Neutrik Instrumentation Inc., a subsidiary of Neutrik AG, 3520 Griffith St., St-Laurent, PQ H4T 1A7. Tel: 514-344-5220; Fax: 514-344-5221.