Oscilloscopes LS 8106: MHz 3 CH- Oscilloscope with CRT Readout

Top of the line in Leader's instruments, Model LS 8106 offers speed and operating shortcuts found in very few modern scopes. Examples include Auto Setup in which a single touch automatically sets both V sensitivity and timebase for instant, optimum waveform display.

Another great convenience is a continuous on-screen readout of the operator's choice of frequency or period and Vp-p or DC level for signals handled in CH1. Solid state switching in the vertical attenuators also eliminates switching noise and ensures long-term reliability. To aid in documentation, on-screen readouts register the status of V and timebase scale factors in use as well as coupling, uncal warning, INVert, ADD, use of MAG, X-Y operation and delay time. These readouts are augmented by precision cursors to make quick work of measuring voltage and time for parts of the waveform as well as frequency, % of presets for both voltage level and time. For example, the latter reads out phase angle in degrees when the timebase is taken out of CAL preset to make a full cycle span 5 divisions. Other features include 3-channel operation with sync selected from all. A maximum of 8 traces can be shown (main and delayed timebases for CH1, CH2, CH3 and ADD (or subtract).

Tequipment.NET, 605 N. Union Avenue, Hillside, NJ 07205. Tel: 800-242-7309; Fax: 908-624-0435.