Supporting end-to-end C-V2X safety related scenarios, the R&S CMW500 wideband radio communication tester enables cellular vehicle-to-everything (C-V2X) device verification in the lab
Rohde & Schwarz, a leading supplier of test & measurement equipment, has expanded the capabilities of its R&S CMW500LTE network simulator and R&S SMBV100A GNSS simulator to support critical end-to-end safety related scenarios for device certification. Working with Qualcomm Technologies, Inc., a subsidiary of Qualcomm Incorporated, and with the Qualcomm 9150 Cellular Vehicle-to-Everything (C-V2X) solution, customers can now validate C-V2X Direct Communications (PC5) Mode 4 (out-of-network coverage) capable devices as defined in 3GPP Release 14. The companies demonstrate this capability at OmniAir Consortium’s Motor City Plugfest in Detroit, Michigan.
C-V2X direct communications capability is designed to allow vehicles to communicate directly with each other (V2V), with vulnerable road users including pedestrians (V2P), and with roadway infrastructures (V2I) without a mobile cellular subscription or network assistance while operating in bands 46D and 47 for the 5.8 GHz and 5.9 GHz ITS spectrum bands. Synchronization of the vehicles uses the existing GNSS satellite signals, which are required for the safety messages for location information.
The R&S CMW-KU514 C-V2X software package on the R&S CMW500 is used to verify end-to-end data transmission and reception over the PC5 interface in ideal, faded and congested channel conditions. Future use cases cover a message transfer from one vehicle to another during emergency braking, or alerts from a car to a pedestrian focusing on his smartphone when crossing a street. Also traffic lights could be made to transmit a countdown information until a light turns red to be displayed in a car‘s dashboard.
C-V2X device testing through the application layer is a significant step towards achieving the goal of having fully connected vehicles to improve public safety. Connected vehicles can use sensors (including radar, lidar, and camera) to track the events happening within its visible range and use the well-established LTE technology in complementary direct (PC5) and network-based (Uu) communication modes to track events happening outside of its visible range, and to obtain information such as intent as well as traffic signal phase and timing (SPaT). While PC5 enables direct communications for active safety scenarios that are latency-sensitive, like collision avoidance, network communications (Uu) extends the range by enabling vehicle-to-network (V2N) to deliver informational safety information to advise of conditions kilometers ahead, such as green light traffic optimization, variable speed limits / brake dampening, and upcoming traffic incidents. Together, direct communications and network communications deliver the promise of the fully connected car, and offer the most compelling and optimized platform for transportation safety and efficiency.
“Chipset vendors and device manufacturers supporting C-V2X for the global automobile industry need a way to verify functionality and performance in a repeatable environment,” said Anton Messmer, VP Mobile Radio Testers at Rohde & Schwarz. “R&S is the only test equipment vendor to offer this capability. Our efforts in developing and verifying C-V2X end-to-end scenarios is enabling user equipment manufacturers to achieve certification for C-V2X on a worldwide basis and in accelerated fashion.”
“OmniAir is excited at the prospect of providing C-V2X device testing and demonstrations as part of our Motor City Plugfest,” said Jason Conley, Executive Director of the OmniAir Consortium. “The testing and demonstration by Rohde & Schwarz and Qualcomm of C-V2X technology shows significant progress toward multi-vendor certification and market deployment.”
Rohde & Schwarz and Qualcomm are scheduled to demonstrate this capability at the ongoing Motor City Plugfest presented by the OmniAir Consortium in Detroit, Michigan from May 7 to 12, 2018.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners.
Qualcomm 9150 C-V2X solution is a product of Qualcomm Technologies, Inc.
About OmniAir Consortium
OmniAir Consortium is a 501(c) (6) nonprofit trade association advancing the deployment of standards-based, interoperable wireless transport technologies that improve mobility, safety, and efficiency of ground transportation networks.
About Rohde & Schwarz
The Rohde & Schwarz technology group develops, produces and markets innovative information and communications technology products for professional users. Rohde & Schwarz focuses on test and measurement, broadcast and media, cybersecurity, secure communications and monitoring and network testing, areas that address many different industry and government-sector market segments. Founded more than 80 years ago, the independent company has an extensive sales and service network in more than 70 countries. On June 30, 2017, Rohde & Schwarz had approximately 10,500 employees. The group achieved a net revenue of approximately EUR 1.9 billion in the 2016/2017 fiscal year (July to June).
SOURCE: Rohde & Schwarz