S&A CRYSTAL TEST FIXTURES ( For leaded device, SMD, and Crystal Blank )

• Measurement heads for leaded devices contain a simple test socket
• Leads protruding from the crystal fit into each contact port
• Available in 12.5 (IEC-444) or 50 PI network

SMD Test Head

• Measurement heads for surface mount devices contain a removable part adapter
• SMD's are placed in part adapter, and held against two contacts by a spring loaded arm that swings over the part and holds it in place
• SMD part adapters are available in different sized sockets to accommodate surface mount devices of varying sizes

Blank Test Head

• Fixtures available for raw and plated blanks (raw blank fixture shown)
• The weighted top portion of the fixture makes contact with the blank itself and the measurement fixture, completing the circuit
• Fixtures for raw blanks require 50 PI network and plated blank fixtures require 12.5 PI network

Saunders and Associates, Inc., 7440 E. Karen Drive, Scottsdale, AZ 85260. Tel: 480 991-9250; Fax: 480 991-9400.