Product/Service

WaterBoy 2

Source: MEECO Inc.
The MEECO WaterBoy 2 is your cost affective solution for reliable, portable moisture analysis
Features:
  • Model F3200: 0-5000 ppmV
  • Model F3250: 0-1000 ppmV
  • CE Mark Approved
  • Units of measure: ppmV, ppmW, lbs/mmscf, °C and °F Dewpoint
  • Lead acid rechargeable battery with built in charging circuit
  • Operating pressure: 50-3000 psig
  • Accuracy: ±5% of reading or 0.4 ppm, whichever is greater
The MEECO WaterBoy 2 is your cost affective solution for reliable, portable moisture analysis. With micro-processor based electronics and a simple three button interface, a choice of five display options and a host of output scales are at your fingertips. A built in pressure regulator rated at 3000 psig, on-board flow control and a rechargeable battery make the WaterBoy 2 a self-contained system that is ready to use right out of the box.

MEECO Inc., 250 Titus Avenue, Warrington, PA 18976-2426. Tel: 215-343-6600; Fax: 215-343-4194.