Downloads
-
25 Watts CW Broadband Hybrid Amplifier: 25HM1G6AB-44
9/20/2013
This RF hybrid amplifier covers the 0.7 to 6 GHz frequency range and provides a minimum of 25 watts RF power. It’s ideal for electronic warfare applications.
-
15 Watts CW Broadband Hybrid Amplifier: 15HM1G6-44
9/20/2013
This RF hybrid amplifier covers the 0.7 to 6 GHz frequency range and provides a minimum of 15 watts RF power. It’s ideal for electronic warfare applications.
-
350 Watts CW Broadband Amplifier: 350S1G6 Datasheet
9/20/2013
This RF amplifier covers the 0.7 to 6 GHz frequency range and provides a minimum of 350 watts RF power. This datasheet includes a detailed description of the amplifier, as well as information on its features and specifications.
-
15 Watts CW Broadband Amplifier: 15S1G6 Datasheet
9/20/2013
This RF amplifier covers the 0.7 to 6 GHz frequency range and provides a minimum of 15 watts RF power. This datasheet includes a detailed description of the amplifier, as well as information on its features and specifications.
-
Base Station Analyzer: BTS Master MT8220T
9/11/2013
The BTS Master MT8220T is Anritsu’s third generation high-performance handheld base station analyzer that has been specifically developed to advance the support for 4G wireless networks as well as installed 2G, 3G and WiMAX networks. The MT8220T provides 20 MHz bandwidth modulation quality for LTE eNodeB testing and is equipped with a high-contrast, touch screen display and backlit key panel making it simple to use in both bright sunlight and dim conditions.
-
Vector Network Analyzers: MS4640B Series
8/20/2013
Anritsu offers the ability make VNA measurements of devices under test (DUTs) stimulated with wideband modulated signals. Utilizing the high speed IF digitizer option available in the VectorStar® series of VNAs, measurements can be made with up to 200 MHz of instantaneous bandwidth in the receiver. Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction.
-
500 Watts CW Solid-State Amplifier: 500W1000B
7/1/2013
This solid-state amplifier covers the 80 MHz to 1000 MHz frequency range and uses push-pull circuitry in its higher power stages in order to lower distortion and improve stability. It’s particularly well suited for applications that require an amplifier with high gain and instantaneous bandwidth.
-
80-1000 MHz Class A Solid State Amplifiers Up To 10,000 Watts
5/14/2013
AR's newly redesigned “W” Series Class A solid state amplifiers have significantly increased their value to our customers. We have superior gain flatness, better noise figure, improved linear power margins, better efficiency, and better harmonics measured at higher powers than in previous designs. And if that wasn’t enough we reduced the size and weight by approximately 50%.
-
Low Cost Attenuators With Ethernet/RS-232 and Manual Control: 50BA-010-127 Datasheet
4/16/2013
The 50BA-010-127 is a configuration with two individually controlled solid-state programmable attenuators in a miniature benchtop enclosure. It operates in the 700-3000 MHz frequency range and has an impedance of 50 Ohms (nominal). For additional specifications, download the datasheet.
-
Low Cost Attenuators With Ethernet/RS-232 And Manual Control: 50BA-011-95 Datasheet
4/16/2013
The 50BA-011-95 setup includes four individually controlled solid-state programmable attenuators in a miniature benchtop enclosure. It covers the 200-6000 MHz frequency range and has a 0-95 dB attenuation range.